Forums > General Discussion > What should I pay attention to during use Folder gluer machine?
| What should I pay attention to during use Folder gluer machine? | |
|---|---|
| Posted: 27 Jun 2022 04:10 UTC | Post #1 |
| royal01 Deck & Engine |
Registered Total Posts: 6 |
| Note for Folder gluer machine: 1. The operation interface of the Folder gluer machine should be kept clean and cleaned frequently. 2. Wipe the mechanical belt with clean water to keep it clean and prevent slipping, especially to prevent it from sticking to the belt. The glue wheel and glue box on the hook bottom of the gluer machine must be cleaned every day after getting off work, otherwise, the glue in the glue box will freeze, which will affect the gluing effect. 3. The glue box of the upper part of this fold should be kept clean and cleaned frequently. 4. It is strictly forbidden to adjust the speed when the speed governor is stopped, otherwise, the belt of the Folder gluer machine will be seriously worn. 5. The inner plate support, shaft, and rod of the Folder gluer machine should be cleaned frequently, and mixed with lubricating oil and butter, the effect is better, and it can shake left and right to prevent rust. 6. It is best to drive slowly before starting the machine to check whether there is any abnormality in the Folder gluer machine. Folder gluer machine Common problems of Folder gluer machine: 1. The viscosity of the adhesive is not good or the amount of glue applied is insufficient. 2. The adhesive and carton data do not match. 3. The sticky mouth part of the carton is processed by laminating, glazing, etc., it is difficult for the glue of the Folder gluer machine to penetrate the surface layer and enter the paper, and the carton is difficult to stick firmly. 4. There is a lack of pressure after folding and gluing, and the pressure time of the Folder gluer machine is not long, which is not conducive to pasting. 5. The sticky mouth of the carton is skewed, the folding transmission of the Folder gluer machine is not properly adjusted, and the conveying speed of the left and right sides of the box sheet is inconsistent, resulting in a skewed sticky mouth. 6. The glue fastness of the Folder gluer machine is not high, the carton is degummed, and the sticky part of the carton is surface-processed by laminating and glazing. The above is the whole content of the Folder gluer machine brought to you by Luo'ao today. The future development of the Folder gluer machine should give the Folder gluer machine more functions. The operation interface of the Folder gluer machine should be kept clean during the use of the Folder gluer machine, and it should be cleaned frequently. During the use of the box machine, problems such as low bonding fastness of the box gluer and degumming of the carton are prone to occur. Folder gluer machine：https://ww w.royal-packings.com /Folder-Gluer-Machin e | |
1 / 1